mv.properties.Machine_Token(bpy.types.PropertyGroup)

    Follow

    PROPERTIES

    is_disabled (BoolProperty) - determines if the token is exported to ERP 

    type_token (EnumProperty , 'NONE', 'CORNERNOTCH', 'CHAMFER', 'CONST', 'HOLES', 'SHLF', 'SHELF', 'SHELFSTD', 'DADO', 'SAW', 'SLIDE', 'CAMLOCK', 'MITER', '3SIDEDNOTCH', 'PLINE', 'BORE') - type of the token

    face (EnumProperty, '1' ,'2' ,'3' ,'4' , '5', '6') - face to assign token to

    edge (EnumProperty, '1' ,'2' ,'3' ,'4' , '5', '6' , '7' , '8') - edge to assign token to

    vector_locations (CollectionProperty) - collection value all of the vectors for PLINE token

    dim_to_first_const_hole (FloatProperty)

    dim_to_last_const_hole (FloatProperty)

    edge_bore_depth (FloatProperty)

    edge_bore_dia (FloatProperty)

    face_bore_depth (FloatProperty)

    face_bore_depth_2 (FloatProperty) 

    face_bore_dia (FloatProperty) 

    face_bore_dia_2 (FloatProperty) 

    drill_from_opposite_side (BoolProperty) 

    second_hole_at_32mm (BoolProperty) 

    distance_between_holes (FloatProperty) 

    hole_locations (FloatProperty) 

    z_value (FloatProperty) 

    dim_in_x (FloatProperty) 

    dim_in_y (FloatProperty) 

    dim_in_z (FloatProperty) 

    end_dim_in_x (FloatProperty) 

    end_dim_in_y (FloatProperty) 

    associative_dia (FloatProperty) 

    associative_depth (FloatProperty) 

    lead_in (FloatProperty) 

    lead_out (FloatProperty) 

    reverse_direction (BoolProperty) 

    beginning_depth (FloatProperty) 

    double_pass (FloatProperty) 

    lock_joint (FloatProperty) 

    panel_penetration (FloatProperty) 

    backset (FloatProperty) 

    cam_face (EnumProperty) 

    tool_comp (EnumProperty) 

    angle (FloatProperty) 

    tool_number (StringProperty) 

    tongue_tool_number (StringProperty) 

    space_from_bottom (FloatProperty) 

    space_from_top (FloatProperty) 

    dim_to_first_row (FloatProperty) 

    dim_to_second_row (FloatProperty) 

    shelf_hole_spacing (FloatProperty) 

    shelf_clip_gap (FloatProperty) 

    dim_from_drawer_bottom (FloatProperty) 

    dim_to_first_hole (FloatProperty) 

    dim_to_second_hole (FloatProperty) 

    dim_to_third_hole (FloatProperty) 

    dim_to_fourth_hole (FloatProperty) 

    dim_to_fifth_hole (FloatProperty) 

    drawer_slide_clearance (FloatProperty)

    FUNCTIONS

    add_driver(obj,token_property,expression,driver_vars,index=None) - adds a formula to a property of a machine token

    Comments